PECULIARITIES OF WALL PLASTERING IN LAYERS
Alignment of the walls during the repair has always been one of the most time-consuming and lengthy processes that required a significant application of force and the presence of special…

Continue reading →

WALL PRIMER - TYPES AND FEATURES OF USE
Before the start of finishing works in the premises resorted to priming the walls. It acts as a base and is required for better adhesion of materials to each other,…

Continue reading →

FEATURES AND BENEFITS OF CONSTRUCTION FROM CONCRETE
Concrete construction is usually large scale. The peak of the popularity of the construction of houses from this material, we remember the times of the USSR. Its unique qualities, which…

Continue reading →

choose the design

1 2 3 7

FEATURES AND BENEFITS OF CONSTRUCTION FROM CONCRETE

Concrete construction is usually large scale. The peak of the popularity of the construction of houses from this material, we remember the times of the USSR. Its unique qualities, which provide buildings with special resistance to wind loads, have returned it to its former demand, because the stabilizing properties became the basis for its mass use in high-rise construction. Another interesting and useful feature is the ability to create any architectural form. Continue reading

PAZEGREB PLATES: PRODUCTION AND FEATURES OF APPLICATION

The main material for the manufacture of tongue-and-groove slabs is building plaster. To connect with each other along the perimeter, they have grooves and ridges. Since gypsum products are distinguished by low moisture resistance and low strength, GWPs are used for the construction of internal partitions or lightly loaded supporting structures that are protected from moisture. In rooms with high humidity, the use of water-resistant plates with green marking paint is recommended. The price of this material is very affordable, which makes it even more popular. Continue reading

FEATURES OF BUILDING HOUSES FROM GAS BLOCKS

Aerocrete units are products of cellular concrete, which has many pores inside. This has a great effect on increasing its thermal conductivity. In addition, the ability to retain heat is affected by a unique composition with the presence of bubbles of hydrogen and aluminum powder. Aerated concrete is produced only in the factory using autoclave plants. In the process of manufacturing, the components enter into a chemical reaction, which causes a cellular structure. Continue reading

1 2 3 7
SANITARY WORKS IN AN APARTMENT - USEFUL ADVICE AND RECOMMENDATIONS
Currently, the demand for plumbing work is very high. The problem of replacing plumbing arises when carrying out repairs in city apartments and private country houses. In addition, in the…

...

Reed roof - advantages and disadvantages
Practicality and environmental friendliness pledge of durable repair and well-being of tenants. Choosing these or other materials for construction, we try to give preference to the best material, thanks to…

...

Self laying laminate
Today laminate flooring has become very popular. The main merit of this is the relatively low cost and good quality. At a low price imitate expensive natural wood floors in…

...

WATERPROOF FLOOR INPUT IN HUMID ROOMS
Waterproofing the floor is necessary in order to isolate the bathroom or kitchen in the event of a leak and not cause damage to the neighbors from the bottom. The…

...